AUDI TT 8N1919880E 509019313411 SW V7.65HL FLASH Y EPROM

**CAPI** · 24-11-2018, 07:29 PM

Debe estar registrado y conectado para ver "ATTACH" el Contenido y darte de alta con paypal...

**Stefa986** · 20-11-2021, 06:13 PM

Hi,sorry but these files are fake ??
Any help with good files 313411 V7.6.5 TT/HL ??
Thanks

**CAPI** · 20-11-2021, 11:20 PM

Hello, this file has been written by several people and I do not have a problem only valid for ETL or CARPROG programmer

This file is read on the tt board with carprog

If you have any problem and I can help you, do not hesitate to write me, Greetings

Debe estar registrado y conectado para ver "ATTACH" el Contenido y darte de alta con paypal...

1 These files are for writing with ETL programmer,
NOT VALUE WITH UPA, ORAGE, XPROG because they read it in another format and weigh more

2.For ETL Motorola 908 programmer

Characteristics

1) In-circuit EEPROM programming (MON08 Rev1 adapter must be used).
2) On-board high-speed FLASH / EEPROM programming.
302x2 colored LED indicates operating mode, power supply status

**Stefa986** · 21-11-2021, 01:04 PM

Hi,thanks for message
i read 3-4 version on these SW with ETL (mcu on board)
all there is version number at address E00
e program start from address E00

on your file all value are hex 18 ??

I have ETL 908 original programmer.

please check ...

**CAPI** · 21-11-2021, 09:35 PM

509019 313411_2J74Y

Hello you are right flash is read with carprog weighs 64.0 kb you have to write with carprog
now I send you a file read with ETL and it weighs 154 kb and this if you have to write with etl

Debe estar registrado y conectado para ver "ATTACH" el Contenido y darte de alta con paypal...

This file is read with etl

**CAPI** · 21-11-2021, 09:53 PM

Hello Stefa, these I read today with carprog they are from audi a3 and it is so that you can see that they weigh the same as those of the tt, but they are not valid for tt, it is only so that you see that this is how the carprog reads because the eprom is separated from the flash, but the file that puts flash is complete and that is what breaks so the needles go wrong that fash is good write it with carprog and you will see how it works for you.
Sorry because I did not explain it with which tool it was read because one programmer does not save it the same as another.
My apologies and in everything that can help you, do not hesitate to write

Debe estar registrado y conectado para ver "ATTACH" el Contenido y darte de alta con paypal...

**Stefa986** · 23-11-2021, 01:27 AM

Hi,
the your file read with ETL work OK
......now all solved .....
Thanks

WBR
Stefa986

Tema: AUDI TT 8N1919880E 509019313411 SW V7.65HL FLASH Y EPROM

Herramientas

Buscar Tema

Visualizar

AUDI TT 8N1919880E 509019313411 SW V7.65HL FLASH Y EPROM

PROGRAMAR CON PROGAMADOR ETL O CARPROG

509019 313411_2J74Y

Temas Similares

AUDI A6 4B0920900N 507000000302 SW V79.1 ML EPROM Y FLASH

AUDI A3 908507000000302 V 7.9.1ML FLASH Y EPROM

AUDI A3 908507000000302 V 7.9.1ML FLASH Y EPROM

AUDI A3 8L0920900M 50400001004 SW 8.42 ML 908 EPROM Y FLASH

AUDI TT 8N1919880E 509019313411 SW V7.65HL FLAX REPARADA MICRO 908

Etiquetas para este Tema

Permisos de Publicación