AUDI TT 8N1919880E 509019313411 SW V7.65HL FLASH Y EPROM
TODO LO RELACIONADO A PROGRAMACION ,REPARACION Y PINOUTS
AUDI TT 8N1919880E 509019313411 SW V7.65HL FLASH Y EPROM
Hi,sorry but these files are fake ??
Any help with good files 313411 V7.6.5 TT/HL ??
Thanks
Hello, this file has been written by several people and I do not have a problem only valid for ETL or CARPROG programmer
This file is read on the tt board with carprog
If you have any problem and I can help you, do not hesitate to write me, Greetings
1 These files are for writing with ETL programmer,
NOT VALUE WITH UPA, ORAGE, XPROG because they read it in another format and weigh more
2.For ETL Motorola 908 programmer
Characteristics
1) In-circuit EEPROM programming (MON08 Rev1 adapter must be used).
2) On-board high-speed FLASH / EEPROM programming.
302x2 colored LED indicates operating mode, power supply status
Hi,thanks for message
i read 3-4 version on these SW with ETL (mcu on board)
all there is version number at address E00
e program start from address E00
on your file all value are hex 18 ??
I have ETL 908 original programmer.
please check ...
509019 313411_2J74Y
Hello you are right flash is read with carprog weighs 64.0 kb you have to write with carprog
now I send you a file read with ETL and it weighs 154 kb and this if you have to write with etl
This file is read with etl
Hello Stefa, these I read today with carprog they are from audi a3 and it is so that you can see that they weigh the same as those of the tt, but they are not valid for tt, it is only so that you see that this is how the carprog reads because the eprom is separated from the flash, but the file that puts flash is complete and that is what breaks so the needles go wrong that fash is good write it with carprog and you will see how it works for you.
Sorry because I did not explain it with which tool it was read because one programmer does not save it the same as another.
My apologies and in everything that can help you, do not hesitate to write
Hi,
the your file read with ETL work OK
......now all solved .....
Thanks
WBR
Stefa986